Finding a good portable Bluetooth speaker is not always easy. Some speakers sound flat when you turn up the volume. Others cost way too much money for what they offer. The Anker Soundcore Motion+ Bluetooth speaker aims to fix these problems. It offers loud sound, deep bass, and clear audio at a reasonable price point. If you want a speaker for your home, yard, or trips, this review covers everything you need to know.
Shopping for tech deals can take a lot of time. You can check our deals review guide to find more tested gear and simple buying tips. In this guide, we take a close look at the specifications, real buyer feedback, and everyday performance of the Soundcore Motion+.
[ADD PRODUCT IMAGE HERE]Disclosure: This post contains affiliate links. We may earn a commission from qualifying purchases at no extra cost to you.
Anker Soundcore Motion+ Overview and Specifications
The Anker Soundcore Motion+ is a portable wireless speaker made for general music lovers. It sits in a popular category of mid-sized portable speakers. It is bigger than tiny pocket speakers, but still small enough to pack in a bag. Anker built this model with audio clarity in mind. It uses dual high-frequency tweeters, dual neodymium woofers, and a passive radiator. This setup pushes out 30 watts of continuous sound.
Below are the verified specifications for the Anker Soundcore Motion+ speaker:
- Audio Output: 30 Watts total continuous power
- Speaker Drivers: Two high-frequency tweeters, two neodymium woofers, one passive radiator
- Frequency Response Range: 50 Hz to 40 kHz
- Bluetooth Version: Bluetooth 5.0 with up to 66-foot range
- Audio Codecs Supported: Qualcomm aptX, SBC, AAC
- Battery Capacity: 6,700 mAh internal lithium-ion battery
- Playtime: Up to 12 hours based on volume and audio settings
- Charging Time: Approximately 3.5 to 4 hours via USB-C
- Water Resistance Rating: IPX7 fully waterproof
- Wired Connection: 3.5 mm auxiliary audio input port
- Equalizer Control: Soundcore smartphone app with 9-band custom EQ
- Dimensions: 10.1 x 3.1 x 3.2 inches
- Weight: 2.31 pounds (1.05 kilograms)
Key Features and Practical Benefits
The Motion+ stands out because of its internal hardware choices. Most speakers in this price range use simple full-range drivers. Anker uses separate drivers for high and low sound frequencies. The two tweeters handle high notes like vocals and cymbals. The woofers and passive radiator handle low notes like drums and bass lines. This split keeps sounds clean so songs do not sound muddy.
Another major feature is Hi-Res Audio certification. The speaker supports Qualcomm aptX technology. When paired with a phone that supports aptX, sound data streams with less compression. You hear cleaner music details that cheap speakers miss.
The speaker also features a 15-degree upward angle. Sound fires slightly upward toward your ears instead of straight into your table. This design helps sound travel better across a room or outdoor patio.
BassUp technology gives you quick bass control. You can press the dedicated BassUp button on top of the speaker to boost lower tones instantly. This feature works great when playing hip-hop, dance music, or action movie audio.
Water protection is another big benefit. The IPX7 rating means the speaker can handle splashes, rain, and short drops into water. You can sit it next to a pool or outdoor sink without worrying about water damage.
Design, Usability, Compatibility, and Sound Performance
The design of the Soundcore Motion+ is simple and functional. The body features a dark matte black finish with a rubber smooth feel. Metal mesh covers the front speaker drivers to shield them from bumps. On top, rubberized buttons let you control power, volume, Bluetooth pairing, and BassUp mode.
Using the speaker is straightforward. Press the power button to turn it on. Hold the Bluetooth button to enter pairing mode. Your phone or laptop finds it in seconds. The Bluetooth 5.0 chip holds a steady connection through walls and across rooms.
App control adds extra value. You can download the free Soundcore app on iOS or Android. The app lets you pick preset equalizer modes or build your own 9-band EQ curve. If you want brighter vocals, you can raise high frequencies. If you like soft acoustic sounds, you can dial down the bass. The settings stay saved on the speaker itself.
Device compatibility is wide. You can connect phones, tablets, computers, and smart TVs via Bluetooth. If you have an older music player, you can use the 3.5 mm auxiliary port hidden under a tight rubber flap on the side.
In terms of audio performance, the Motion+ sounds surprisingly large for its physical footprint. Vocals sound crisp and clear. Acoustic guitars sound detailed. Bass output feels solid and tight, though it will not shake your whole floor like a big subwoofer. High volumes stay clean without harsh static or sound bending.
Pros and Cons
Every audio product has strengths and weak spots. Here is a quick look at the main pros and cons reported by buyers and testing data.
Pros:
- Separate tweeters and woofers deliver clear audio separation.
- Qualcomm aptX support offers high quality Bluetooth audio streaming.
- Soundcore app allows deep custom 9-band EQ adjustments.
- Full IPX7 waterproof rating shields against rain and pool splashes.
- Upward angled design helps project sound across open rooms.
- Solid battery performance for full-day music listening.
- Two Motion+ units can pair together for true stereo sound.
Cons:
- Matte rubber finish can collect finger smudges and dust easily.
- Heavy weight makes it less ideal for ultralight hiking.
- Battery drains faster when playing at maximum volume levels.
- No built-in microphone for speakerphone voice calls.
- Rubber port cover can be stiff to pull open.
Customer Feedback and Common Buyer Concerns
Customer feedback for the Anker Soundcore Motion+ is broadly positive across thousands of buyer reviews. Owners frequently praise the sound quality relative to cost. Many buyers report that this speaker sounds clearer than popular models costing much more.
The custom EQ feature in the Soundcore app is another customer favorite. Users mention that the default sound profile is decent, but tweaking the EQ turns the speaker into something special. Lowering mid frequencies slightly and boosting highs makes songs pop.
However, real owners do report a few practical concerns. First, battery life varies based on volume and EQ settings. Anker claims up to 12 hours of playback. Buyers report getting around 10 to 12 hours at mid-volume levels. But if you run the volume near 80 percent with BassUp active, total play time drops down to around 6 or 7 hours.
Another point mentioned by users is physical weight. At over two pounds, it feels solid and durable, but it adds noticeable weight to a backpack. A few buyers also note that the rubber exterior attracts dust particles and skin oil marks over time.
Comparison with Similar Bluetooth Speakers
How does the Soundcore Motion+ stack up against rival portable speakers? Let us compare it to two popular options in the market.
Motion+ vs. JBL Flip 6
The JBL Flip 6 is one of the most famous portable speakers today. It is smaller, lighter, and easier to hold in one hand than the Motion+. The JBL Flip 6 also carries an IP67 rating, meaning it holds protection against dust as well as water.
However, the Soundcore Motion+ beats the JBL Flip 6 in audio flexibility and power. The Motion+ has 30 watts of power compared to 20 watts on the JBL. The Motion+ offers separate tweeters and woofers for wider sound separation, along with aptX codec support. The custom EQ in the Soundcore app is also far more detailed than JBL settings. If you want portability, JBL wins. If you care about raw sound detail and customization, Anker wins.
Motion+ vs. Soundcore Motion Boom
Anker also makes the Motion Boom speaker. The Motion Boom features a top carry handle and uses titanium drivers. It focuses heavily on deep bass and outdoor projection. It also floats on top of water if dropped into a pool.
The Motion+ offers cleaner high notes and vocals due to its separate tweeters. The Motion Boom provides bigger bass output and longer battery life, but lacks aptX support and has a larger plastic body. If you want portable power on the go, you can also check our Anker 622 Magnetic Battery review to keep your mobile devices charged during long trips.
Who Should Consider Buying the Motion+?
The Anker Soundcore Motion+ fits specific listener needs very well. You should consider buying this speaker if you fall into one of these groups:
- Desk Workers and Home Listeners: Its angled frame sits nicely on desks or shelves, filling rooms with clear sound without taking up much space.
- Backyard and Patio Entertainers: The 30-watt power output and IPX7 rating make it great for outdoor barbecues, patio dinners, or garage work.
- Budget-Conscious Audio Fans: People who want detailed sound with aptX support without spending top dollar on big brands will love the value here.
- Custom Sound Tweakers: If you enjoy adjusting equalizer settings on your phone to match different music styles, the app control provides great freedom.
On the other hand, you should look at other options if you need a lightweight speaker for long wilderness hikes. You may also want a different model if you need a built-in microphone for phone calls or voice assistants like Alexa.
Important Things to Check Before Purchasing
Before buying the Soundcore Motion+, keep a few practical items in mind:
First, verify your primary audio devices. To get full value from the aptX codec, your phone or computer must support aptX. Apple iPhones use AAC, which still sounds good on this speaker, but Android users with aptX phones get the best audio resolution.
Second, check where you plan to place the speaker. Because of its directional design, it sounds best when pointed toward listeners. If you need 360-degree sound that spreads equally in every direction around a round table, a cylindrical speaker might fit your setup better.
Third, decide if you want stereo sound. Purchasing two Motion+ units allows you to pair them wirelessly. This creates a true left and right stereo speaker system with double the total volume.
Disclosure: This post contains affiliate links. We may earn a commission from qualifying purchases at no extra cost to you.
Final Verdict and Recommendation
The Anker Soundcore Motion+ Bluetooth speaker remains one of the best in short values in portable audio gear. Anker put real engineering effort into the speaker design by including separate high-frequency tweeters and woofers. Combined with 30 watts of output, aptX support, and an open custom EQ app, it punches well above its price tag.
It is not the lightest speaker on the block, and the rubber coating picks up smudges. But when it comes to raw sound clarity, punchy low-end response, and reliable build quality, it is easy to recommend. If you want great sound for home or outdoor use without paying premium brand tax, the Motion+ is a smart purchase.
Genuine Sources and Reference Links
For additional detailed specs and product support documentation directly from the maker, you can review the official Anker resource:
Frequently Asked Questions
Is the Anker Soundcore Motion+ completely waterproof?
Yes. The speaker holds an IPX7 water resistance rating. This means it can survive being submerged in water up to one meter deep for up to 30 minutes. Just make sure the side rubber port cover is fully sealed before getting it wet.
Can you charge the speaker while playing music?
Yes. You can plug the USB-C cable into a power adapter or power bank while playing audio. Keep in mind that playing music at max volume while charging will make charging take longer.
Does the Motion+ have a microphone for phone calls?
No. The Motion+ does not include an internal microphone. If a phone call comes in while your phone is connected, audio will switch back to your phone receiver or handset speaker.
How do you pair two Motion+ speakers together?
Turn on both Motion+ speakers. Connect your phone to one of them via Bluetooth. Press and hold the Bluetooth button on both speakers for three seconds. They will link together automatically and assign left and right audio channels.
SEO Metadata Summary
SEO Title: Anker Soundcore Motion+ Review: High-Res Bluetooth Speaker
Meta Description: Read our detailed review of the Anker Soundcore Motion+ Bluetooth speaker. Discover sound specs, battery life, user feedback, pros, cons, and alternatives.
URL Slug: anker-soundcore-motion-plus-review